MOPAR 2485325 Air Inlet Vent Left 68CN1-4W5

( Brand: Mopar ), ( Manufacturer Part Number: 2485325 ), ( Part Type: Vent ), ( Surface Finish: Original Oem Mopar Parts ), ( Country/region Of Manufacture: United States )

Review MOPAR Fresh Air Inlet Vent Left Dodge Plymouth Chrysler Full Size fits 1965-68

The 68CN1-4W5 Air Inlet Vent is an essential component for maintaining the proper airflow and ventilation in your 1965-1968 Dodge Plymouth or Chrysler vehicle. This Mopar part, with the catalog number 2485325, is designed specifically for the left side of your vehicle.

Constructed from high-quality materials, this air inlet vent features a durable design that can withstand the rigors of regular use on the road. The vent measures 6.8 inches in length and 4.5 inches in width, ensuring a secure fit in your vehicle's engine compartment.

The 68CN1-4W5 Air Inlet Vent is designed to allow fresh air to flow into your engine compartment while preventing debris and water from entering. This helps to maintain optimal engine performance and temperature, reducing the risk of overheating and other mechanical issues.

This Mopar part is easy to install, requiring no specialized tools or extensive mechanical knowledge. Simply remove the old vent, clean the area, and install the new 68CN1-4W5 Air Inlet Vent in its place. The vent comes with all necessary mounting hardware, making the installation process simple and straightforward.

Investing in a high-quality air inlet vent like the 68CN1-4W5 is a smart choice for any 1965-1968 Dodge Plymouth or Chrysler vehicle owner. Not only does it improve engine performance and longevity, but it also helps to maintain the overall appearance and value of your classic car.

In summary, the 68CN1-4W5 Air Inlet Vent is a crucial part for your 1965-1968 Dodge Plymouth or Chrysler vehicle. Its durable construction, easy installation, and effectiveness in allowing fresh air to flow into the engine compartment make it an excellent choice for maintaining your vehicle's performance and appearance.

1. Originality: This part is a direct replacement for the original air inlet vent, ensuring a factory-like fit and appearance.

2. Quality: Mopar parts are known for their high-quality construction and durability, ensuring that the part will function reliably for a long time.

3. Availability: This part is readily available from several sources, making it easy to find and purchase.

1. Price: Mopar parts can be more expensive than aftermarket alternatives, which may be a consideration for some buyers.

2. Limited customization: Since this is an original replacement part, there may be limited options for customization compared to aftermarket alternatives.

If you're looking for a high-quality, factory-like replacement for your 1965-68 Dodge Plymouth/Chrysler air inlet vent, the 68CN1-4W5 is a great option. While it may be more expensive than some aftermarket alternatives, its originality and high-quality construction make it a worthwhile investment for many car enthusiasts. Ultimately, the decision to purchase this part depends on your specific needs, budget, and priorities as a car owner.

If you are looking for a high-quality, factory-like replacement for your 1965-68 Dodge Plymouth/Chrysler air inlet vent, the 68CN1-4W5 is a great option. However, if you are looking for a more budget-friendly alternative, you may want to consider some aftermarket options that may offer similar functionality at a lower price point. Ultimately, it's important to research and compare different options to find the best fit for your specific needs and budget.

Details:

Handling costs.

Engine assembly mounts oil cooler parts, misc.

Steering wheel sun roof motor panel suspension compressor x member k-frame tail finish gate molding lamp tailgate front deck lid temperature control throttle body valve assembly timing cover tire top section, rear torque converter transfer case transmission module trans axle trim panel, door trunk turbocharger supercharger vacuum pump water rim bearing, window defogger, washer motor, windshield frame reservoir wiper arm wire harness, moulding carpet headliner dash bezel ashtray glove box shiftier emergency brake e-brake glove box dome light clip bows trims a pillar cut air bag detector cleaner conditioner clutch condenser evaporator hoses wiring harness flow meter injection alternator automatic oil cooler axle assembly, 4wd carrier coil spring arm, lower Dana spicier corp Wagner Borg Warner upper drive shaft, hub outer locking independent leaf spring, loaded beam, 2wd parts, misc. No troubles.

This allows you to choose the cheapest shipping cost. Body wiring harness brake anti lock parts caliper master cylinder parts, misc.

Rear brake proportioning valve brakes, braking, assembly, Assam, Assam end cap guard, reinforcement, bumper valance, cab clip carburetor pillar clock clutch master cylinder complete vehicles for sale console cowl vent panel crank cam angle sensor crankshaft cruise speed regulator block head dash assembly wiring harness deck lid tailgate distributor side, back handle outer hinge, lock solenoid molding, mirror window regulator, crank, motor erg maintenance reminder electric seat belt track electrical parts, misc. Canadian buyers.

Good used part.

We post as many can the shipping companies and are always changing their pricing rate scales.

Items like this are usually engines, axles, major large body sections.

Interior sun visor jack tool kit license lamp misc.

The bus has a 100lb and 82 inch longest side maximum.

This usually includes USPS and fed-ex.

Brake parts, misc.

Inches cut off time is the day before at 5:00pm pacific. To obtain a bunch of quotes from different carriers at one time. The container is full of other peoples items as well.

There is a part casting number: application - fits: Dodge: Monaco polar full-size 1968 2dr convertible coupe 4dr hardtop sedan station wagon Plymouth: fury gran fury-1 fury-2 Chrysler: Newport, Newark, 3 Windsor Canadian model if you are sitting in the car this would be located: left side front interior, behind kick panel cosmetic condition out of 10: 7.

Axle shaft spindle knuckle, stub, rear suspension strut back glass regulator backing plate, backup lamp bell housing belt pensioner blower motor body parts, misc.

Our time zone is pacific. Apps and very limiting do not show all the info that is usually viewed by a person at home computer.

All our listings from this point downward are the same:attention. If the pricing is not correct for shipping please a price quote. End pivot hole has some wear, does not affect the use, works well.

Or near Oslo's BC on Canadian side of the border.

Gasket is worn, but usable no blames, cracks or pitting.

Slower most economical cheapest service for items within these sizes.

Fresh air inlet vent - left Dodge Plymouth Chrysler full size 68CN1-4W5 this listing is for: a drivers side Forest non conditioned car. For heavy items smaller its best to go in a flat rate medium or large box.

Safely wrapped box shipping size is 14.

Fed ex smart post and regular ground or home service.

This has been happening since recent update.

Electrical switch panel switch, column electronic chassis control modules engine module parts, misc. Lower down in the listing on your phone or app see details to all pictures and info about parts.

Courier fee added to bus shipping cost pay for the transport from Orville Wenatchee depot by. On the see details beside shipping price, or tab to different prices.

These are companies that accept the parcel on your behalf to one of their depots in a shipping port here USA.

For example, if you live in Sweden.

part #: 2485325 prices

• $41.99-$89.97

specifications vintagacheatin:

• for makes: Dodge, Plymouth, Chrysler, Mopar
• for years: 1965-68
• brand: Mopar
• mpn: 2485325
• part type: Vent
• surface finish: Original Oem Mopar Parts
• country/region of manufacture: United States

Payments vintagacheatin:

• PayPal

General vintagacheatin:

• in stock: Yes
• motors > partsaccessories > vintage cartruck parts > acheating vintage parts
• condition: Used

Offer vintagacheatin:

• Started: October 13, 2018, 6:58 pm
• best offer: false
• Sold: 0
• bids: 0
• quantity: 1

Seller vintagacheatin:

• city: Oroville, Washington
• zipcode: 98844

Returns vintagacheatin:

• policy: no returns

Ratings:

1. Positive transaction 10-12-18
2. quick delivery item as advertised 10-12-18
3. Great seller quick shipping part is just as listed 10-12-18
4. packaged nice, shiping fast. 10-13-18
5. Good quality ,A fast shipping 10-13-18

Shipping vintagacheatin:

• handling: 5 days
• type: Calculated

Mopar 2485325 Is Similar To:

• 03846544 Mopar Vintage Chrysler Dodge Plymouth Compressor (52.8% similar) This compressor can be converted from R-12 to R134A if desired. Up for sale is one used vintage Mopar RV-2 A/C compressor. This compressor was removed from a v8 engine needs to be rebuilt for reliable working condition. Part, cast-iron compressor, v-shaped cylinder head construction...(December 2nd, 2018)
• 03849406 Chrysler Mopar Air Conditioning Pressure Switch Part For Veh (17.5% similar) This is a new, chrysler Mopar company original equipment, never installed, air conditioning pressure switch, believed to fit and dodge cars vans. Any flaws are mentioned and most times even pictured in the so there should be no surprises. You can contact me if you prefer a specific carrier or method...(March 9th, 2018)
• 04361231 Mopar 81-93 Dodge Truck (38% similar) Pretty good shape, did not see any issues upon looking over. Includes two control cables. Up for sale is a heater box removed from 1984 dodge D350 non c, heat only...(September 13th, 2017)
• 04540320 Mopar Chrysler Atc Sensor Nos (37.7% similar) Here is a new nos chrysler Mopar ACT sensor part...(September 4th, 2018)
• 04773221 Mopar Chrysler Dodge Nos (37.6% similar) The line is Mopar parts number, this genuine part, it no longer available from chrysler corporation. Storage trailer shelf EB270909 note: the Mopar carton may possibly be used as shipping. Questions: e-mail with any questions and I will get back to you in a reasonable time. I will try to describe ...(October 17th, 2017)
• 1189497 Mopar Tan Plastic Heater Knob Set Plymouth Nos (42.6% similar) Offered is a 3 piece tan plastic heater knob set as found on the plymouth P15. They were part of a kit that also contained few washers and nuts which are not included. When only nos Mopar will do. The knobs are 70 years old and will have typical slight patina of a vintage plastic part. Location LHS ...(October 17th, 2018)
• 1244602 Chrysler Mopar Heater Switch Assy Nos (23% similar) This fits model's with model heaters. Nos in good, unused condition, 1950 chrysler Mopar heater switch assay...(October 3rd, 2018)
• Chrysler Switch 1950 Heater Defroster 1244603 1949 Nos Dodge Mopar 1244603 Plymouth Mopar (26.8% similar) ...(March 24th, 2015)
• 1257355 Mopar Nos Defroster Heat Duct Windshield Dodge Chrysler Desoto (46.4% similar) Verify fitment for your application. Nos chrysler corp duct work piece...(April 14th, 2018)
• 1263994 Mopar Nos 1949-54 Dodge (34.3% similar) Push pull switch. Mopar part in box poor switch has some discoloration on case. Switch is stamped culvert sterns. Fits the following: chrysler, DODGE1953 1954 plymouth, destine nos dodge plymouth deist chrysler heater switch...(July 21st, 2017)
• 1266979 Mopar Heater Air Knob Chrysler Dodge Plymouth Desoto Nos (53% similar) Offered is a chrome air heater knob as found on 1949 chrysler plymouth dodge and deist cars fitted with the series 100. The box was 1ST opened for this ad. Location LHS r2 hatbox. It is as good nos gets. When only nos Mopar will do...(October 17th, 2018)